China Textured Geomembrane Factory – China HDPE Geomembrane Liner Fish Pond Sheet – LANHUA GROUP
China Textured Geomembrane Factory – China HDPE Geomembrane Liner Fish Pond Sheet – LANHUA GROUP Detail:
1. HDPE liner has complete width and thickness specifications.
2. wholesale HDPE Liner made in China has an excellent anti-seepage effect.
3. low price China HDPE liner has excellent environmental stress cracking resistance and chemical corrosion resistance.
4. wholesale HDPE Liner made in China has excellent chemical corrosion resistance.
5. China HDPE liner factory price has a large service temperature range and long service life.
We are a professional China HDPE liner manufacturers, supply low price & high quality China HDPE liner, if you want to purchase high quality HDPE liner wholesale HDPE Liner made in China, welcome to consult China HDPE liner factory price.
|
HDPE Geomembrane ( GRI GM-13) |
|||||||||
|
No. |
Test item |
Technical data |
|||||||
|
Thickness（mm) |
0.50 |
0.75 |
1.00 |
1.25 |
1.50 |
2.00 |
2.50 |
3.00 |
|
|
1 |
Density g/m2 |
≥0.94 |
≥0.94 |
≥0.94 |
≥0.94 |
≥0.94 |
≥0.94 |
≥0.94 |
≥0.94 |
|
2 |
Tensile Yield Strength （MD&TD) (N/mm) |
≥8 |
≥11 |
≥15 |
≥18 |
≥22 |
≥29 |
≥37 |
≥44 |
|
3 |
Tensile Breaking Strength (MD&TD) (N/mm) |
≥13 |
≥20 |
≥27 |
≥33 |
≥40 |
≥53 |
≥67 |
≥80 |
|
4 |
Elongation at yield (MD&TD) (%) |
≥12 |
≥12 |
≥12 |
≥12 |
≥12 |
≥12 |
≥12 |
≥12 |
|
5 |
Elongation at break (MD&TD) (%) |
≥700 |
≥700 |
≥700 |
≥700 |
≥700 |
≥700 |
≥700 |
≥700 |
|
6 |
Tear Resistance (MD&TD) (N) |
≥58 |
≥93 |
≥125 |
≥160 |
≥190 |
≥250 |
≥315 |
≥375 |
|
7 |
Puncture Strength (N) |
≥160 |
≥240 |
≥320 |
≥400 |
≥480 |
≥640 |
≥800 |
≥960 |
|
8 |
Tensile load stress cracking (Constant load tensile method of the incision) |
≥300 |
≥300 |
≥300 |
≥300 |
≥300 |
≥300 |
≥300 |
≥300 |
|
9 |
Carbon Black Content (%) |
2.0-3.0 |
2.0-3.0 |
2.0-3.0 |
2.0-3.0 |
2.0-3.0 |
2.0-3.0 |
2.0-3.0 |
2.0-3.0 |
|
10 |
85°C heat aging (Atmospheric OIT retention after 90d) (%) |
≥55 |
≥55 |
≥55 |
≥55 |
≥55 |
≥55 |
≥55 |
≥55 |
|
11 |
UV protection (OIT retention rate after 1600h utilizing) |
≥50 |
≥50 |
≥50 |
≥50 |
≥50 |
≥50 |
≥50 |
≥50 |
|
12 |
Carbon black dispersion |
In 10 data, Grade 3≤1, Grade 4,5 are not allowed |
|||||||
|
13 |
Oxidative Induction Time (min) |
Atmospheric oxidative induction time≧100 |
|||||||
|
High pressure oxidative induction time≧400 |
|||||||||
1. Environmental protection and sanitation (e.g. landfill, sewage treatment, poisonous and harmful substance treatment plant, dangerous goods warehouse, industrial waste, construction, and blasting waste, etc.)
2. Water conservancy (such as seepage prevention, leak plugging, reinforcement, seepage prevention vertical core wall of canals, slope protection, etc.)
3. Municipal works (subway, underground works of buildings and roof cisterns, seepage prevention of roof gardens, the lining of sewage pipes, etc.)
4. Garden (artificial lake, pond, golf course pond bottom lining, slope protection, etc.)
5. Petrochemical (chemical plant, refinery, gas station tank seepage control, chemical reaction tank, sedimentation tank lining, secondary lining, etc.)
6. Mining industry (bottom lining impermeability of washing pond, heap leaching pond, ash yard, dissolution pond, sedimentation pond, heap yard, tailings pond, etc.)
7. Agriculture (seepage control of reservoirs, drinking ponds, storage ponds, and irrigation systems.)
8. Aquaculture (lining of the fish pond, shrimp pond, slope protection of sea cucumber circle, etc.)
9. Salt industry (salt crystallization pool, brine pool cover, salt geomembrane, salt pool geomembrane.)
Please do not drag the China HDPE liner factory price produced by China HDPE liner manufacturers HDPE Geomembrane in the transportation, and avoid stabbing by sharp objects.
1. From the bottom to the high extension, do not pull too tight, should leave 1.50% of the residual, in case of local subsidence stretch. Considering the actual situation of this project, the slope is laid from top to bottom.
2. The longitudinal joints of adjacent two pieces shall not be in a horizontal line and shall stagger each other for more than 1m;
3. The longitudinal joint shall be more than 1.5m away from the dam foot and bend foot and shall be set on the plane;
4. Install the wholesale HDPE Liner made in China on the Slope first, then install the bottom.
5. When the slope is laid, the film-spreading direction should be basically parallel to the maximum slope line.
6. The temperature should generally be more than 5 degrees Celsius, low price purchase high quality HDPE liner China HDPE liner HDPE geomembrane should be tense at low temperature, low price China HDPE liner produced by China HDPE liner manufacturers should be loose at high temperature.
7. The wind is below grade 4 for work conditions.
8. When the temperature is too low, the construction should not be carried out in windy and sleet weather above grade 4.
9. In windy weather, when the wind influences the construction of purchase high quality HDPE liner, the China HDPE liner factory price to be welded shall be pressed firmly with sandbags.
Product detail pictures:
Related Product Guide:
We are convinced that with joint endeavours, the small business between us will bring us mutual benefits. We could assure you products quality and competitive selling price for China Textured Geomembrane Factory – China HDPE Geomembrane Liner Fish Pond Sheet – LANHUA GROUP , The product will supply to all over the world, such as: Morocco, Croatia, Munich, The development of our company not only needs the guarantee of quality, reasonable price and perfect service, but also relies on our customer's trust and support! In the future, we will continue with the most professional and high quality service to provide the most competitive price, Together with our customers and achieve win-win! Welcome to inquiry and consult!
By Dinah from Israel - 2018.11.06 10:04
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By EliecerJimenez from Liverpool - 2018.02.04 14:13
